Gyara View Standard Haske mai launin shuɗi 3014 SMD LED

Mene ne gefen da ke fitarwa?

Wannan 3065D2L12 gefen abin da ya haifar da launi mai launin shuɗi. Kuma muna samar da shi tare da SMD ta gefen SMD ta smd ta hanyar fitar da lamarin. To me ke gefen fitarwa? AD Mun sani, mafi yawan SMD LED zai fitar da hasken daga saman LED. A wannan gefe mai daidaitaccen tsarin LED, za ku iya sawa shi daga gefe ko ƙasa. Saboda akwai wasu siyar da siyarwa a kasan SMD LED da gefen SMD LED. Lokacin da muka kunna wannan SMD ya jagoranci jigon kasan, to, wannan blue smd LED zai zama babban kallo SMD LED. Kuma zai zama gefen fitarwa da aka jagoranci yayin da muke sayar da shi a kan kwamitin PCB tare da kushin gefen. Wannan SMD ya fitar zai fitar da haske daga gefen LED maimakon daga saman. Cewa dalilin da ya sa muke kiran shi a matsayin gefen da yake jagorantar.

Fitowa 3014 Emit,

Zabin lantarki:

* Juya gaba mai rikitarwa na yanzu: Wajibi 1% da kuma girman kai = 10Us.

* Haɗin kai: Haɗin kansa dole ne a kammala shi tare da 3 secondds a 260 ℃

* Ana auna ƙarfin haske da ZWL600.

* An samo shi ne daga zane-zane na CIE Chromaticity kuma yana wakiltar igiyar ruwa guda wanda ya bayyana launin na'urar.

Kula da tsayawar:

Kwatanta da epoxy Expsulant wanda ke da wuya da kuma rauni, silicone wani sifter da kuma silicone yana da ƙarfi rage damuwa da ƙarfi. A sakamakon haka, yana kulawa da ayyukan kulawa na musamman yayin haɗuwa a yayin haɗuwa ta amfani da samfuran silicone samfurori. Rashin bibiyar yiwuwar lalacewa da rashin nasarar da aka lalata

1. rike da bangaren tare da saman gefen ta amfani da karfi ko kayan aikin da suka dace.

2, kada ku taɓa taɓa kai tsaye ko ɗaukar ruwan tabarau na silicone. Yana iya lalata murnan ciki.

3, kar a tattara kwaya tare da kwayoyin da ke ɗauke da leds. Tasiri na iya karye ruwan tabarau na silicone ko lalata murabba'in ciki.

4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;

4-BA plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.

4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;

4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances.

5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.

6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.