Blue LEDs SMD LED tare da SMT 3535 LED

3W Babban Wuta SMT 3535 LED tare da LED 480mn

3535PBC48D60L45 babban LED ne mai launin shuɗi tare da akwati na 3535 SMD LED. Saboda akwai ruwan tabarau mai ɗorewa akan farfajiyar SMD LED, Hakanan kuna iya kiran wannan a matsayin babban ƙarfin Dome Lens SMD LED. A yadda aka saba shudiyar SMD LED (ko ta ramin LED ) za ta fitar da 470nm LED ko 450nm sarari mai launin shuɗi. 480nm zai kasance kusa da koren launi 520nm, ta yadda launin 480nm zai zama ruwan shuɗi mai haske. Yana da haske fiye da 470nm ko 460nm zurfin shuɗi LED. Kwatanta da sauran shuɗi LED, wannan 480nm shuɗi mai launin shuɗi mai haske iri ne na musamman kuma ba mai sauƙin gani bane. A cikin wannan samfurin, mun haɗa shi da 3535 Blue SMD LED case kuma mu samar da shi da guntu mai ƙarfi. Kuna iya sauƙaƙe fitar da wannan hasken tare da ko da ƙaramin aiki na yanzu. A lokaci guda, lokacin da kuke buƙatar ƙarin haske ko fitarwa, kawai ku ji kyauta don haɓaka halin yanzu, zai iya ɗaukar 700mA na yanzu kuma yana fitar da 50-70lm a wancan lokacin.

Idan kuna neman babban ikon LED mai launin shuɗi, wannan ba zai ƙyale ku ba ~

Girman 3535 Blue SMD LED:

Sassan lantarki:

*Pulse gaba da rikicewar halin yanzu: Wajibi 1% da faɗin Pulse = 10us.

*Rikicin siyarwa: Dole ne a kammala takaddama na siyarwa tare da raƙuman daƙiƙa 3 a 260 ℃

*Ana auna ƙarfin haske ta ZWL600.

*λD an samo shi ne daga ƙirar ƙirar ƙirar CIE kuma tana wakiltar raƙuman ruwa guda ɗaya wanda ke bayyana launi na na'urar.

Don tabbatar da cewa duk abokin cinikinmu zai iya samun cikakkiyar aiki daga wannan 480nm LED tare da babban iko 3535 case, muna samar da wannan babban ikon LED tare da tsayayyen sabon guntu, firam ɗin kulawa, madaidaicin epoxy don ruwan tabarau da madaidaicin waya don haɗin ciki.

Aikace -aikacen:

HANYOYIN GYARA:

Kwatanta da encapsulant na epoxy wanda yake da ƙarfi da rauni, silicone yana da taushi da sassauƙa Althouth halinsaistiec yana rage matsanancin zafi, yana da saukin kamuwa da lalacewa ta hanyar ƙarfin inji. Sakamakon haka, ana buƙatar kiyaye takamaiman kulawa ta musamman yayin taro ta amfani da samfuran Led wanda aka haɗa. Rashin yin biyayya na iya haifar da lalacewa da gazawar jagora

1. Riƙe ɓangaren tare da saman gefen ta amfani da ƙarfi ko kayan aikin da suka dace.

2, Kada ku taɓa kai tsaye ko kula da saman ruwan tabarau na silicone. Zai iya lalata kewayawa na ciki.

3, Kada ku haɗa PCBS da aka haɗa tare da fitilolin fallasa. Tasiri na iya ƙin ruwan tabarau na silicone ko lalata kewaya ta ciki.

4, 4-A Matsakaicin ciki na bututun karba na SMD bai kamata ya wuce girman LED don hana kwararar iska ba;

An ba da shawarar kayan kwalliya na 4-BA don ƙuƙwalwar ƙuƙwalwa don guje wa ƙwanƙwasawa ko lalata saman LED yayin ɗauka.

4-C Dole ne a tsara madaidaicin sashin a cikin injin da aka ɗora don sanya inshora daidai da kuma gujewa lalacewa yayin samarwa;

4-D Kamar yadda encapsulation na silicone ya mamaye gas, wasu abubuwa masu lalata kamar H2S na iya lalata plationg na azurfa. Yakamata a kula sosai idan ana amfani da LED tare da murfin silicone kusa da irin waɗannan abubuwan.

5, Da fatan aviod ya ci gaba da fallasa yanayin muhalli mai ɗimbin yawa kuma ya kiyaye samfurin daga jujjuyawar yanayi a yanayin zafin ambiemt.

6, Samfurin a cikin kunshin da aka rufe na asali ana ba da shawarar a haɗa shi cikin awanni 24 na buɗewa.