680nm LED Light tare da 3014 LED SMT

680nm LED Lights tare da 3014 LED SMD

Wannan shine 3014 SMD LED wanda ke da madaurin 680nm LED a ciki. Tsawon zango na 680nm yana ɗaya daga cikin mahimman sashi don wasu jajayen LED masu girma girma. Wannan siririn girman SMD kunshin sassauƙan ƙira ne, wanda zai iya zama 3014 SMD LED 2835 SMD LED ko 5050 SMD LED ect. Don tabbatar da ingancin, muna samar da wannan 680nm LED tare da 99.99% tsararren zinare na zinare, wanda zai iya sa wannan LED ya sami ingantaccen aiki kuma ya sa ya iya ɗaukar aiki mafi girma fiye da waya azurfa ko waya. A lokaci guda, muna kuma amfani da firam ɗin jan ƙarfe na jan ƙarfe don tabbatar da cewa wannan LED ba zai yi tsatsa da sauƙi kamar ƙarfe ba.

Hakanan mutane za su buƙaci 660nm LED don aikace -aikacen haske mai haske na LED. Idan kuna buƙatar wasu SMD LED tare da wannan raƙuman ruwa, kawai ku ji daɗin tuntuɓar mu kuma ku sami ƙarin cikakkun bayanai game da shi ~

Siffofin LED na SMD:

Girma: 3.0mm x 1.4mm x H0.8mm;

Wavelength: 680nm LED;

Nau'in ruwan tabarau: Share epoxy;

High AMINCI da high radiation intersity;

Sassan lantarki:

*Pulse gaba da rikicewar halin yanzu: Duty 1% da faɗin Pulse = 10us.

*Rikici na siyarwa: Dole ne a kammala takaddama na sulhu tare da raƙuman daƙiƙa 3 a 260 ℃

*Ana auna ƙarfin haske ta ZWL600.

*λD an samo shi daga ƙirar ƙirar ƙirar CIE kuma tana wakiltar raƙuman ruwa guda ɗaya wanda ke bayyana launi na na'urar.

Babban aikace -aikacen:

LED Backlight;

Aikace -aikacen likita;

Haske mai nuni;

Bayanin samfur:

99.99% tsarki waya zinariya;

Red jan LED frame;

Shahararriyar kwakwalwan kwamfuta;

Epoxy mai inganci;

Tsarin masana'antu na LED SMD:

Lokacin da muka samar da wannan LED, muna buƙatar shirya guntu na LED. Wannan shine matakin farko; Abu na biyu, muna buƙatar gyara guntu a cikin firam ɗin mu na 3014 SMD LED. Kuma na uku, muna buƙatar amfani da zinaren zinare mai tsabta don haɗa da'ira a ciki. Sannan za mu cika firam ɗin LED tare da epoxy da phosphor (idan muna samar da farin SMD LED), wanda zai iya kare guntu na LED daga lalacewar ƙarfin waje. Saboda epoxy yana da ruwa, muna buƙatar bushe shi da tanda na awanni 8 aƙalla. Har zuwa yanzu, mun yi yawancin abubuwan samarwa.

Bayan mun ɗauki wannan LED daga tanda, muna buƙatar sanya duk LED ɗin zuwa injin rarrabuwa don rarrabe LED tare da bin (ko ƙarfin lantarki) daban -daban.

Mataki na ƙarshe shine kunsa shi azaman reel ~

HANYOYIN GYARA:

Kwatanta da encapsulant na epoxy wanda yake da wahala da rauni, silicone yana da taushi da sassauƙa Althouth halayensaistiec yana rage matsanancin zafi, yana da saukin kamuwa da lalacewa ta hanyar ƙarfin inji. A sakamakon haka, ana buƙatar kiyaye takamaiman kulawa ta musamman yayin taro ta amfani da samfuran Led wanda aka haɗa. Rashin yin biyayya na iya haifar da lalacewa da gazawar jagora

1. Riƙe ɓangaren tare da saman gefen ta amfani da ƙarfi ko kayan aikin da suka dace.

2, Kada ku taɓa kai tsaye ko kula da saman ruwan tabarau na silicone. Yana iya lalata kewayawa na ciki.

3, Kada ku haɗa PCBS da aka haɗa tare da fitilolin fallasa. Tasiri na iya ƙin ruwan tabarau na silicone ko lalata kewaya ta ciki.

4, 4-A Matsakaicin ciki na bututun karba na SMD bai kamata ya wuce girman LED don hana kwararar iska ba;

An ba da shawarar kayan kwalliya na 4-BA don ƙuƙwalwar ƙuƙwalwa don guje wa ƙwanƙwasawa ko lalata saman LED yayin ɗauka.

4-C Dole ne a tsara madaidaicin sashin a cikin injin da aka ɗora don sanya inshora daidai kuma a guji lalacewa yayin samarwa;

4-D Kamar yadda encapsulation na silicone ya mamaye gas, wasu abubuwa masu lalata kamar H2S na iya lalata plationg na azurfa. Yakamata a kula sosai idan ana amfani da LED tare da murfin silicone kusa da irin waɗannan abubuwan.

5, Don Allah aviod ya ci gaba da fallasa yanayin muhalli mai ɗimbin yawa kuma ya kiyaye samfurin daga jujjuyawar yanayi a yanayin zafin ambiemt.

6, Samfurin a cikin kunshin da aka rufe na asali ana ba da shawarar a haɗa shi cikin awanni 24 na buɗewa.